DSHD-200 sea engineering geological exploration drilling rig is a
top drive power head type drilling machine with long feeding
stroke. It adopted advanced technique of adjustable rotary speed
frequency changer and equipped with 8 m high derrick. It can be
used to work under the condition of 80 m water depth and wind scale
less than 5 grade. It is also used for water area geological
exploration drilling and pile hole drilling in river or lake. Main
set of drill can be used for drilling pile holes on land.
1) Top drive power head of drill adopts frequency changer to adjust
rotary speed steplessly. It features long feeding stroke, compact
structure, rational arrangement and wide regulating speed range.
With the result that drilling machine can meet the demand of
drilling in a great variety of complicated formation.
2) Safety and reliable falling-resistant apparatus of top drive
power head can ensure the safety of equipment and personnel.
3) Feed micro-adjusting mechanism of drilling machine can ensure
equipment and personal safety.
4) Mechanization of break-out drill rods with hydraulic break-out
apparatus reduces labor strength and increase drilling efficiency.
5) Moving top drive power head rearward integrally ensures large
floor space and convenient for frequently hoisting and lowering the
drilling rod .
6) Equipped with the advanced bottom sampling device, it can meet
sampling demand in complicated formation.
1) Hole diameter Ø75 - Ø220 mm
2) Hole depth 200-80 m
3) Rod diameter Ø50 mm, Ø114 mm wire line core barrel
4) Rotary speed of top drive power head
Low speed range (forward and reverse)-233 r /min
High speed range (forward and reverse) 16-540 r/min
5) Feeding stroke of top drive power head 500 mm
6) Electromotor power of top drive power head 22 kW
7) Lifting capacity (single wire rope) of main hoist 30 kN
Lifting capacity (single wire rope) of auxiliary hoist 20 kN
8) Mast height 8 m